PPPoE is used by ISPs for assigning IP addresses to the PPPoE clients. 

The Seqrite UTM can be configured to act as a PPPoE client when deployed in Gateway Mode.



For configuring PPPoE in Seqrite UTM 

1. Please navigate to Network > Interface 

2. Select a physical interface and give a suitable name to it.

3. Select Network Zone as WAN.

4. Select IP Assignment as PPPoE 

    Enter User Name and Password provided by IPS provider.

5. LCP Echo Interval: 

    Enter the time to wait before sending an echo request, which will check whether the link works or not.

    The default interval is 20 seconds.

6. LCP failure:

    Enter the number of failed attempts allowed before the PPPoE link is declared as closed.

    The Default failure attempts are 3.

7. Service Name: 


    Enter the Service name provided by ISP.

8. Link check method:

    You can select either ICMP or DNS.

    Click on Apply and save to configure the Interface.

Please contact Seqrite Technical Support for more assistance.